Alvin Products

Product Line

Galvax (Brushable Gallon)

Protects metal surfaces. The 95% pure zinc cold galvanizing compound electro-chemically bonds with metals to stop rust creepage and corrosion. Sprays or brushes on cold. Heals itself when scratched. A coating of Galvax is comparable to hot-dip galvanizing for metal protection. Cures damaged hot dip coatings and repairs damaged galvanized surfaces. Used for welding touch-ups and spot-priming.
 
For more information see www.alvinproducts.com

Purchase Galvax (Brushable Gallon) Online

Galvax (Brushable Quart)

Protects metal surfaces. The 95% pure zinc cold galvanizing compound electro-chemically bonds with metals to stop rust creepage and corrosion. Sprays or brushes on cold. Heals itself when scratched. A coating of Galvax is comparable to hot-dip galvanizing for metal protection. Cures damaged hot dip coatings and repairs damaged galvanized surfaces. Used for welding touch-ups and spot-priming.
 
For more information see www.alvinproducts.com

Purchase Galvax (Brushable Quart) Online

Galvax (zinc rich aerosol)

Zinc-rich cold galvanizer. 12 oz Aerosol Can.
 
This product is used as a zinc rich primer, zinc rich paint, zinc coating, zinc paint, zinc primer. Protects metal surfaces. The 95% pure zinc cold galvanizing compound electro-chemically bonds with metals to stop rust creepage and corrosion. Sprays or brushes on cold. Heals itself when scratched. A coating of Galvax is comparable to hot-dip galvanizing for metal protection. Cures damaged hot dip coatings and repairs damaged galvanized surfaces. Used for welding touch-ups and spot-priming.
 
For more information see www.alvinproducts.com

Purchase Galvax (zinc rich aerosol) Online

Heat Block (1 Gallon)

Insulation compound with unique heat absorbing properties prevents heat transfer during welding, soldering, brazing or other heat treatment.
 
Heat absorbing properties insulate and protect parts and materials from damag during repair and installation work. Non-toxic, easy to use. Applications include heat damage prevention in the automotive, welding, plumbing and shipyard industries.

Purchase Heat Block (1 Gallon) Online

Heat Block (5 Gallon)

Insulation compound with unique heat absorbing properties prevents heat transfer during welding, soldering, brazing or other heat treatment.
 
Heat absorbing properties insulate and protect parts and materials from damag during repair and installation work. Non-toxic, easy to use. Applications include heat damage prevention in the automotive, welding, plumbing and shipyard industries.

Purchase Heat Block (5 Gallon) Online

Heat Block (Pint Jar)

Insulation compound with unique heat absorbing properties prevents heat transfer during welding, soldering, brazing or other heat treatment.
 
Heat absorbing properties insulate and protect parts and materials from damag during repair and installation work. Non-toxic, easy to use. Applications include heat damage prevention in the automotive, welding, plumbing and shipyard industries.

Purchase Heat Block (Pint Jar) Online

Heat Block (Quart Jar)

Insulation compound with unique heat absorbing properties prevents heat transfer during welding, soldering, brazing or other heat treatment.
 
Heat absorbing properties insulate and protect parts and materials from damag during repair and installation work. Non-toxic, easy to use. Applications include heat damage prevention in the automotive, welding, plumbing and shipyard industries.

Purchase Heat Block (Quart Jar) Online

Hi-Temp Lab-metal (14 oz. can)

Permanent repair compound - withstands 1000ºF
 
Hi-Temp Lab-metal is ready-to-use right from the can. Developed for difficult repairs subject to excessive heat, Hi-Temp Lab-metal withstands temperatures as high as 1000ºF.
 
Hi-Temp Lab-metal can be used as a epoxy putty, auto body filler, epoxy repair putty, high temperature epoxy.
 
For more information see www.alvinproducts.com

Purchase Hi-Temp Lab-metal (14 oz. can) Online

Hi-Temp Lab-metal (24 oz. can)

Permanent repair compound - withstands 1000ºF
 
Hi-Temp Lab-metal is ready-to-use right from the can. Developed for difficult repairs subject to excessive heat, Hi-Temp Lab-metal withstands temperatures as high as 1000ºF.
 
Hi-Temp Lab-metal can be used as a epoxy putty, auto body filler, epoxy repair putty, high temperature epoxy.
 
For more information see www.alvinproducts.com

Purchase Hi-Temp Lab-metal (24 oz. can) Online

Lab-metal (12 oz. can)

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass. Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack.
 
Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single can -- simply add Lab-solvent before covering. Workability of Lab-metal is enhanced by dipping applicator into Lab-solvent. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating.
 
Lab-metal is not intended to be used as an adhesive. Ready-to-use metal repair putty, dent filler and patching compound. High Temperature epoxy for powder coating. High Temperature Adhesive used to fill dents and surface imperfections. High Temperature Putty for automotive and aoundry applications. High Temperature paste that hardens into metal.
 
For more information click www.alvinproducts.com

Purchase Lab-metal (12 oz. can) Online

Lab-metal (20 oz. Caulking Tube)

Ready-to-use metal repair putty, dent filler and patching compound.

Adheres to metal, wood, plastic, glass. Apply right from the tube. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack. Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single tube. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating. Lab-metal is not intended to be used as an adhesive. Please review product literature, warnings and MSDS prior to use. Lab-metal is an air-dry metal repair product designed for cosmetically filling, sealing, patching and smoothing dents, cracks, pinholes, welded seams…virtually hundreds of repairs. Ideal for OEMs, metal fabricators, metal furniture manufacturers, powder coaters, welders, plumbers, auto restorers, machine shops, do-it-yourselfers. When applying, surface must be clean and dry, and roughened for improved adhesion. Cut tip to desired opening-size and PUNCTURE INNER SEAL. To smooth the Lab-metal bead: immediately after application, shape with an applicator moistened with Lab-solvent. Apply Lab-metal in thin layers and let each fully harden in order to "build up" Lab-metal. Not intended for use as an adhesive. Store in a cool place. Because Lab-metal dries rapidly, we recommend that the entire contents be used within 60 days of opening tube. Please test the suitability of Lab-metal for each specific application. WARNING: FLAMMABLE LIQUID AND VAPOR. Contains powdered aluminum, methyl ethyl ketone, toluol. USE ONLY WITH ADEQUATE VENTILATION. Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Keep away from heat, sparks, and flame. VAPORS MAY CAUSE FLASH FIRE. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Avoid contact with skin and eyes. This product contains a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Store in a cool place. FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention. If affected by inhalation of vapor, remove to fresh air. If difficulty persists, get medical assistance. If swallowed, do not induce vomiting. Get medical attention immediately. For skin, wash thoroughly with soap and water.
 
Read the Label in PDF format.

Purchase Lab-metal (20 oz. Caulking Tube) Online

Lab-metal (24 oz. can)

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass. Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack.
 
Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single can -- simply add Lab-solvent before covering. Workability of Lab-metal is enhanced by dipping applicator into Lab-solvent. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating.
 
Lab-metal is not intended to be used as an adhesive. Ready-to-use metal repair putty, dent filler and patching compound. High Temperature epoxy for powder coating. High Temperature Adhesive used to fill dents and surface imperfections. High Temperature Putty for automotive and aoundry applications. High Temperature paste that hardens into metal.
 
For detailed product information see www.alvinproducts.com

Purchase Lab-metal (24 oz. can) Online

Lab-metal (48 oz. can)

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass. Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack. Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single can -- simply add Lab-solvent before covering. Workability of Lab-metal is enhanced by dipping applicator into Lab-solvent. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating. Lab-metal is not intended to be used as an adhesive. Lab-metal can be used as a epoxy putty, auto body filler, epoxy repair putty, high temperature epoxy.
 
For more information see www.alvinproducts.com

Purchase Lab-metal (48 oz. can) Online

Lab-metal (6 oz. can)

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass. Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack.
 
Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single can -- simply add Lab-solvent before covering. Workability of Lab-metal is enhanced by dipping applicator into Lab-solvent. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating.
 
Lab-metal is not intended to be used as an adhesive. Ready-to-use metal repair putty, dent filler and patching compound. High Temperature epoxy for powder coating. High Temperature Adhesive used to fill dents and surface imperfections. High Temperature Putty for automotive and aoundry applications. High Temperature paste that hardens into metal.
 
For more information click www.alvinproducts.com

Purchase Lab-metal (6 oz. can) Online

Lab-metal (gallon can)

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass. Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground, and sanded smooth. Will not shrink or crack.
 
Water resistant, rustproof. Withstands heat to 350ºF and cold to -40ºF. Thin with Lab-solvent for brushing or spraying a metallic coating. Many applications may be made from a single can -- simply add Lab-solvent before covering. Workability of Lab-metal is enhanced by dipping applicator into Lab-solvent. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings; repairing parts prior to powder coating.
 
Lab-metal is not intended to be used as an adhesive. Ready-to-use metal repair putty, dent filler and patching compound. High Temperature epoxy for powder coating. High Temperature Adhesive used to fill dents and surface imperfections. High Temperature Putty for automotive and aoundry applications. High Temperature paste that hardens into metal.
 
For detailed product information see www.alvinproducts.com

Purchase Lab-metal (gallon can) Online

Lab-solvent (16 oz. can)

Thinner for Lab-metal and Hi-Temp Lab-metal, and metal cleaner. Lab-solvent cuts grease, oil and dirt, and is recommended as a metal cleaner and degreaser to prepare surfaces for Lab-metal and Hi-Temp Lab-metal applications. Removes paint quickly and efficiently. Lab-solvent thins Lab-metal to paint consistency for brushing or spraying a metallic coating. To prevent hardening of Lab-metal and Hi-Temp Lab-metal in the can, wet the surface of the metal repair compound with Lab-solvent and cover tightly after each use.

Purchase Lab-solvent (16 oz. can) Online

Rubber In A Can

PTEN Top 100This product is easy to use right from an aerosol can. This product comes out of the can as a black rubberized liquid. Rubber In a Can from Alvin Products flows into cracks and holes and creates a tight rubber surface drying to a flexible, rubberized watertight coating. Alvin's rubber in a can should be in every garage, tool box and on the job site.

  • Stays flexible
  • Seals water and moisture penetration
  • Non sagging formulation
  • Will not crack, chip or peel
  • Application to wet and dry surfaces
  • Paintable
Used on Pipes, Gutters, drip pans, roofs, down spouts, campers and RV's, skylights, leaky surfaces, duct work and a/c units, boats, outdoor fountains, birdbaths, ponds and planters, concrete foundations or any surface you need a water tight rubber sealant.
 
For more information see www.Rubber-In-A-Can.com  

Alvin Products recommends testing each application for suitability. Shake well! Spray on a clean surface holding can 12-15 inches from the surface and apply using steady even strokes. Apply multiple thin coats instead of a single thick coat to ensure dry time and adhesion.

Purchase Rubber In A Can Online

Telcon

Mold release and dry lubricant. 11 oz Aerosol Can.
 
Provides a clean, tough, invisible shield. Oil free, greaseless, stainless, colorless. Use as a mold release for molded rubber, epoxy resins and other polymers. Lubricates with a film that is water, oil, and dirt repellent, and has outstanding anti-stick qualities to make moving parts last longer and work more easily. Use as a lubricant for sliding or threaded parts, precision instruments, cutting edges. Speeds clean-up in areas of frequent sticky product spillage. Withstands temperatures up to 500ºF and down to the cryogenic range. Can be sprayed, brushed, or dipped. Telcon contains no ozone depleting chemicals.

Purchase Telcon Online